This is a read-only archive of the inkscapeforum.com site. You can search for info here or post new questions and comments at Hi I'm new to Inkscape and I am trying to set line width to 0.01 mm as recommended by Ponoko for laser cutting.
but when I do this the object becomes invisible.
I am doing this in stroke style width
the lowest I seem to be able to get is 0.1, I can type in a value less than this but then the object is gone.
Any help would be appreciated.
when setting linewidth = .01mm object disappears
-
warwickbeer
- Posts: 2
- Joined: Wed Feb 22, 2017 9:17 am
-
tylerdurden
- Posts: 2344
- Joined: Sun Apr 14, 2013 12:04 pm
- Location: Michigan, USA
Re: when setting linewidth = .01mm object disappears
You can see the lines by changing to Menu:View>Display Mode>Outline.
You could also zoom way in, but of course it would be hard to see the whole drawing.
You could also zoom way in, but of course it would be hard to see the whole drawing.
Have a nice day.
I'm using Inkscape 0.92.2 (5c3e80d, 2017-08-06), 64 bit win8.1
The Inkscape manual has lots of helpful info! http://tavmjong.free.fr/INKSCAPE/MANUAL/html/
I'm using Inkscape 0.92.2 (5c3e80d, 2017-08-06), 64 bit win8.1
The Inkscape manual has lots of helpful info! http://tavmjong.free.fr/INKSCAPE/MANUAL/html/
-
warwickbeer
- Posts: 2
- Joined: Wed Feb 22, 2017 9:17 am
Re: when setting linewidth = .01mm object disappears
thats what I needed thankyou!