This is a read-only archive of the inkscapeforum.com site. You can search for info here or post new questions and comments at Hi Everyone!
I want to make a better icon.
But I don't know what is the font type M letter is used in this file attached.
How can I find of this font type?
Thanks!
Help to find font type
-
Vitor Mazuco
- Posts: 13
- Joined: Mon Jan 05, 2015 10:53 pm
- Location: São Paulo, Brazil
Help to find font type
- Attachments
-
- icone.png (2.69 KiB) Viewed 4282 times
Re: Help to find font type
Hi.
That's probably not part of a font, but some misdrawn blackletter -gothic texutre- lettering.
Anyway, check this topic, and/or maybe ask typophile's experts.
Good luck!
That's probably not part of a font, but some misdrawn blackletter -gothic texutre- lettering.
Anyway, check this topic, and/or maybe ask typophile's experts.
Good luck!
Re: Help to find font type
Yeah, I agree, that looks like it was hand drawn by someone. My college roommate used to fill out certificates and such, for some extra income, using hand calligraphy. And that looks a lot like something she might write.
But you could probably find a font with a letter like that, or maybe that you even like better. Myfonts.com have a lot of free fonts, and 1001 free fonts is all free fonts, and there are a few more good fonts sites where you can look, but I don't have their names at the tip of my tongue. Maybe some are mentioned in the topic Lazur referenced?
But you could probably find a font with a letter like that, or maybe that you even like better. Myfonts.com have a lot of free fonts, and 1001 free fonts is all free fonts, and there are a few more good fonts sites where you can look, but I don't have their names at the tip of my tongue. Maybe some are mentioned in the topic Lazur referenced?
Basics - Help menu > Tutorials
Manual - Inkscape: Guide to a Vector Drawing Program
Inkscape Community - Inkscape FAQ - Gallery
Inkscape for Cutting Design
Manual - Inkscape: Guide to a Vector Drawing Program
Inkscape Community - Inkscape FAQ - Gallery
Inkscape for Cutting Design
Re: Help to find font type
A quick try with What The Font didn't come up with an answer based on this letter.
https://www.myfonts.com/WhatTheFont/res ... &x=48&y=48
https://www.myfonts.com/WhatTheFont/res ... &x=48&y=48
Re: Help to find font type
Hi.
The font is similar to this "Old English";
Hand-tracing the image in the example is a quick job in inkscape:
Result;
Due to the very small image and the "quick job" the result might be inaccurate and not be suitable to your application.
RGDS
Ragnar
The font is similar to this "Old English";
Hand-tracing the image in the example is a quick job in inkscape:
Result;
Due to the very small image and the "quick job" the result might be inaccurate and not be suitable to your application.
RGDS
Ragnar
Good Luck!
( ͡° ͜ʖ ͡°)
RGDS
Ragnar
( ͡° ͜ʖ ͡°)
RGDS
Ragnar
Re: Help to find font type
A bit on letter structure of this writing:
http://alexandresaintpierre.blogspot.hu/2013/11/technique-gothic-textura-quadrata.html
http://alexandresaintpierre.blogspot.hu/2013/11/technique-gothic-textura-quadrata.html
Re: Help to find font type
It's so interesting to break things down into their lowest or most basic state sometimes. Lazur's image reminds me of tangrams. So you could actually recreate that letter m, according to that image, using Inkscape's Rectangle tool and skewing! (also rotating and maybe snapping) Although that may be a less than ideal approach, depending what you want to do with it, in the end.
Basics - Help menu > Tutorials
Manual - Inkscape: Guide to a Vector Drawing Program
Inkscape Community - Inkscape FAQ - Gallery
Inkscape for Cutting Design
Manual - Inkscape: Guide to a Vector Drawing Program
Inkscape Community - Inkscape FAQ - Gallery
Inkscape for Cutting Design
-
Vitor Mazuco
- Posts: 13
- Joined: Mon Jan 05, 2015 10:53 pm
- Location: São Paulo, Brazil
Re: Help to find font type
ragstian wrote:Hi.
The font is similar to this "Old English";
Hand-tracing the image in the example is a quick job in inkscape:
Result;
Due to the very small image and the "quick job" the result might be inaccurate and not be suitable to your application.
RGDS
Ragnar
Hi Ragnar!
How can I make this using Inkscape?
Are there a tutorial for I learn?
Thanks in advanced!
Re: Help to find font type
Hi.
Open Inkscape -
Import Image - Select your Icon Image
Select image on screen (F1 - then click on image)
Zoom to image (3) - (On the main keyboard)
Use the line tool to trace the outline. (Shift + F6)
I recommend going through the tutorials (quick start) in the online manual: Inkscape: Guide to a Vector Drawing Program
Good Luck.
GDS
Ragnar
How can I make this using Inkscape?
Open Inkscape -
Import Image - Select your Icon Image
Select image on screen (F1 - then click on image)
Zoom to image (3) - (On the main keyboard)
Use the line tool to trace the outline. (Shift + F6)
Are there a tutorial for I learn?
I recommend going through the tutorials (quick start) in the online manual: Inkscape: Guide to a Vector Drawing Program
Good Luck.
GDS
Ragnar
Last edited by ragstian on Thu Jan 08, 2015 12:40 pm, edited 1 time in total.
Good Luck!
( ͡° ͜ʖ ͡°)
RGDS
Ragnar
( ͡° ͜ʖ ͡°)
RGDS
Ragnar
-
Vitor Mazuco
- Posts: 13
- Joined: Mon Jan 05, 2015 10:53 pm
- Location: São Paulo, Brazil
Re: Help to find font type
Ok, thanks, so much