This is a read-only archive of the inkscapeforum.com site. You can search for info here or post new questions and comments at When opened in IrfanView the figure is as it should be but when i open it in GSview it gets elongated in such a way that it consist of 3 actual figures which are separated by large transparent blocks. Besides that before opening the figure GSview reports warning:
Warning: media size is very large. Please check "Media|User Defined"
I'm using Win7 x64. I uploaded the project in order for somebody to check if the same happens on other PCs?
eps is not the same in the ghostview as is in the irfanview
eps is not the same in the ghostview as is in the irfanview
- Attachments
-
- slika15HF.svg
- (48.47 KiB) Downloaded 186 times
Re: eps is not the same in the ghostview as is in the irfanv
Hi.
There were some objects in your svg with no fills and with no strokes, which were way off the image's borders.
Try what happens if you remove those.
There were some objects in your svg with no fills and with no strokes, which were way off the image's borders.
Try what happens if you remove those.
- Attachments
-
- slika15HFII.svg
- (68.98 KiB) Downloaded 184 times
Re: eps is not the same in the ghostview as is in the irfanv
Lazur URH wrote:Hi.
There were some objects in your svg with no fills and with no strokes, which were way off the image's borders.
Try what happens if you remove those.
I remove them but it did not helped
-
tylerdurden
- Posts: 2344
- Joined: Sun Apr 14, 2013 12:04 pm
- Location: Michigan, USA
Re: eps is not the same in the ghostview as is in the irfanv
Maybe check your GSview is correct version in both.
As noted above, deleting hidden junk from the svg may help display the exported eps. "vacuum defs" may also help.
As noted above, deleting hidden junk from the svg may help display the exported eps. "vacuum defs" may also help.
- Attachments
-
- slika15HF-TD1-compare.jpg (80.08 KiB) Viewed 2078 times
Have a nice day.
I'm using Inkscape 0.92.2 (5c3e80d, 2017-08-06), 64 bit win8.1
The Inkscape manual has lots of helpful info! http://tavmjong.free.fr/INKSCAPE/MANUAL/html/
I'm using Inkscape 0.92.2 (5c3e80d, 2017-08-06), 64 bit win8.1
The Inkscape manual has lots of helpful info! http://tavmjong.free.fr/INKSCAPE/MANUAL/html/
Re: eps is not the same in the ghostview as is in the irfanv
tylerdurden wrote:Maybe check your GSview is correct version in both.
As noted above, deleting hidden junk from the svg may help display the exported eps. "vacuum defs" may also help.
Thank you,
deleting junk helps.
Have a nice day