This is a read-only archive of the inkscapeforum.com site. You can search for info here or post new questions and comments at hi!(excuse me for english)
I have to separate, a logo, with two different colors
I created the first half of the logo and then duplicate the second side
but unfortunately, the two sides do not connect well
see example
Logo - Share a color, in equal
-
Alexxandro
- Posts: 28
- Joined: Fri May 15, 2009 6:20 am
- Contact:
Logo - Share a color, in equal
- Attachments
-
- partcolor.svg
- (2.77 KiB) Downloaded 205 times
Re: Logo - Share a color, in equal
Hi.
You should use Snapping and the Grid Guides.
Switch on View > Show/Hide > Snap Controls Bar.
On this Snapping bar, make sure the 1st button and the two last last buttons are on.
Select View > Grid, to display the Grid.
Now, when you move nodes, they snap on the grid, so you get them perfectly and easily aligned.
I attach a modified SVG if it can be of any help.
Best regards.
You should use Snapping and the Grid Guides.
Switch on View > Show/Hide > Snap Controls Bar.
On this Snapping bar, make sure the 1st button and the two last last buttons are on.
Select View > Grid, to display the Grid.
Now, when you move nodes, they snap on the grid, so you get them perfectly and easily aligned.
I attach a modified SVG if it can be of any help.
Best regards.
- Attachments
-
- InkscapeForum_Alexxandro_partcolor-2.svg
- (2.59 KiB) Downloaded 181 times
-
Alexxandro
- Posts: 28
- Joined: Fri May 15, 2009 6:20 am
- Contact:
Re: Logo - Share a color, in equal
you can show you the menu screen
Function snapping in Italian can not understand how you turn
Function snapping in Italian can not understand how you turn
Re: Logo - Share a color, in equal
Hi.
- To show the snapping bar : http://dl.getdropbox.com/u/2024234/Vrac ... ngBar.jpeg
- To configure the snapping bar : http://dl.getdropbox.com/u/2024234/Vrac ... ngBar.jpeg
- To show the grid : http://dl.getdropbox.com/u/2024234/Vrac ... eGrid.jpeg
Regards.
- To show the snapping bar : http://dl.getdropbox.com/u/2024234/Vrac ... ngBar.jpeg
- To configure the snapping bar : http://dl.getdropbox.com/u/2024234/Vrac ... ngBar.jpeg
- To show the grid : http://dl.getdropbox.com/u/2024234/Vrac ... eGrid.jpeg
Regards.
-
Alexxandro
- Posts: 28
- Joined: Fri May 15, 2009 6:20 am
- Contact:
Re: Logo - Share a color, in equal
but there's that voice
- Attachments
-
- menu.jpg (64.21 KiB) Viewed 3556 times
Re: Logo - Share a color, in equal
Ok. It's because you are on the 0.46 version and I'm on the 0.47.
Snapping is better handled on 0.47.
Nevertheless, you still can have some grid snapping on the 0.46.
Press Shift+Ctrl+D and set it like this : http://dl.getdropbox.com/u/2024234/Vrac ... nOn46.jpeg
You an adjust the sensitivity of the snapping but it's a bit crappy beacause it depends on the zoom factor.
Snapping is better handled on 0.47.
Nevertheless, you still can have some grid snapping on the 0.46.
Press Shift+Ctrl+D and set it like this : http://dl.getdropbox.com/u/2024234/Vrac ... nOn46.jpeg
You an adjust the sensitivity of the snapping but it's a bit crappy beacause it depends on the zoom factor.
-
Alexxandro
- Posts: 28
- Joined: Fri May 15, 2009 6:20 am
- Contact:
Re: Logo - Share a color, in equal
ok! If I understand correctly, the other side, hook automatically on the grid line
another problem:
because the line of the two logos do not match, even hitting the vertical axis
see example
another problem:
because the line of the two logos do not match, even hitting the vertical axis
see example
- Attachments
-
- centrare.svg
- (9.7 KiB) Downloaded 182 times
Re: Logo - Share a color, in equal
Lines doesn't match because the vertical line of the background logo is actually not vertical.
It's why you should use the grid and snap nodes on the grid. It helps a lot to keep things straight and aligned.
Maybe you should try to install Inkscape 0.47 (it's not stable yet, but quite). Snapping it way better. You'll be able to install back Inkscape 0.46 if you don't like the 0.47.
It's why you should use the grid and snap nodes on the grid. It helps a lot to keep things straight and aligned.
Maybe you should try to install Inkscape 0.47 (it's not stable yet, but quite). Snapping it way better. You'll be able to install back Inkscape 0.46 if you don't like the 0.47.
-
Alexxandro
- Posts: 28
- Joined: Fri May 15, 2009 6:20 am
- Contact:
Re: Logo - Share a color, in equal
Watch Now:
- Attachments
-
- inlinea.svg
- (6.08 KiB) Downloaded 203 times
Re: Logo - Share a color, in equal
Great, it seems you got it 
-
Alexxandro
- Posts: 28
- Joined: Fri May 15, 2009 6:20 am
- Contact:
Re: Logo - Share a color, in equal
thank you!for kindness 
-
Alexxandro
- Posts: 28
- Joined: Fri May 15, 2009 6:20 am
- Contact:
Re: Logo - Share a color, in equal
important suggestion to align nodes...thank you
-
Alexxandro
- Posts: 28
- Joined: Fri May 15, 2009 6:20 am
- Contact:
Re: Logo - Share a color, in equal
another question
if I rasterizes, an image, which is undulating curves and can align the nodes in a curvilinear?
see example
if I rasterizes, an image, which is undulating curves and can align the nodes in a curvilinear?
see example
- Attachments
-
- curvilinea.svg
- (36.35 KiB) Downloaded 181 times
Re: Logo - Share a color, in equal
Maybe is there a better way to do it, but you can select the curve, do Path > Simplify (Ctrl+L) about 10 times. You'll still have to manually tweak the curve a bit.
-
Alexxandro
- Posts: 28
- Joined: Fri May 15, 2009 6:20 am
- Contact:
Re: Logo - Share a color, in equal
therefore the best method is to follow the lines, with the image under
this is the end of work
this is the end of work
- Attachments
-
- LOGOFLUMINI(byAlex).svg
- (27.14 KiB) Downloaded 188 times
-
Alexxandro
- Posts: 28
- Joined: Fri May 15, 2009 6:20 am
- Contact:
Re: Logo - Share a color, in equal
RM. wrote:Pure io sardo!Good job!
Ciao! non sono sardo
è di un mio amico