Author Topic: Fill and stroke dialog  (Read 1001 times)

February 19, 2018, 04:45:01 AM
Read 1001 times

clayton_r

  • Newbie

  • Offline
  • *

  • 1
Apologies if this is covered somewhere in the forum. I did search for it, but didn't come up with anything. Out of the box, I was able to use the Fill and Stroke dialog in the right panel, along with Transform, Align and Distribute, etc. Not sure what I did, but now the Fill and Stroke tool is in the lower and upper toolbar (see attached image).

When I click on the Fill and Stroke icon in the toolbar on the right side of the display, nothing happens. I've searched through the menus. How do I get the Fill and Stroke dialog back into the right side panel?
  • 0.92.1 r15371
  • windows 7

February 19, 2018, 05:20:12 PM
Reply #1

Moini

  • IC Mentor

  • Offline
  • ******

  • 1,568
    • VektorRascheln
Try if closing the other dialogs brings it up again.

February 20, 2018, 01:41:17 AM
Reply #2

brynn

  • Administrator

  • Offline
  • ******

  • 3,941
  • Gender
    Female

    Female
    • Inkscape Community
Welcome to the forum!

If you have other dialogs already open in that docking area, it's possible that Fill and Stroke is opening below those that are already open.  You might have to scroll down to find it.

If that doesn't work, try closing Inkscape and re-opening.

Let us know what happens :)
  • Inkscape version 0.92.3
  • Windows 7 Pro, 64-bit
Inkscape Tutorials (and manuals)                      Inkscape Community Gallery                        Inkscape for Cutting Design                     



"Be ashamed to die until you have won some victory for humanity" - Horace Mann